| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
| Ports: | 24 |
| Product Name: | 24 Ports Gigabit Smart Poe Switch |
| Uplink Ports: | 2*10/100/1000Mbps SFP Uplink Ports |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Description
L2 24+4 10Gigabit Ethernet Switch is standard third-layer non-blocking switch. Provides 24 10/100/1000Base-T Ethernet ports, 4 10G SFP+ ports. Based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, L3 24+4 10Gigabit Ethernet Switch provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.The user can set all kinds of functions of switch through the Web, SNMP and so on. L3 24+4 10Gigabit Ethernet Switch very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
16-Port 10/100/1000Mbps + 2 Gigabit Como unmanaged PoE Switch
• 16-Port support power to PoE Powered Device
• Complies with the IEEE 802.3f/at standard
• If 8 POE port work only, then complies with IEEE 802.3at standard,25W each port
• Each Switching port support auto-negotiation 10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet) supported
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Non blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
• 7.2 Gbps Switching Capacity
• On/Off power switch
|
The product model |
L3 24+4 10Gigabit Ethernet Switch |
|
Basic characteristics |
|
|
Fixed port |
24 10/100/1000Base-T Ethernet ports, 4 10G SFP+ ports |
|
Backplane bandwidth |
128Gbps |
|
Packet forwarding rate |
95.232Mpps |
|
Processor |
RISC 400MHz |
|
Flash memory capacity |
8MB |
|
The memory capacity |
128MB |
|
Address table |
16K |
|
Product characteristics |
|
|
Spanning tree |
Support STP, RSTP, MSTP |
|
VLAN |
Support port-based VLAN |
|
Flow control |
Based on a standard IEEE 802.3x flow control |
|
Broadcast control |
Restraining broadcast storm, stop sending so long as reaching a critical point |
|
multicast control |
IGMP Snooping multicast message automatic monitoring |
|
multicast routing |
IGMP v1/v2/v3, MLDv2 |
|
Port binding |
Each group of a maximum of 8, while support 128 group |
|
Port mirroring |
Support based on flow classification mirroring and port mirroring |
|
Stacked |
Stacked 16 hard, soft stacking 32 |
|
Routing management |
Static routing |
|
Strategy routing |
Support based on IP strategy routing |
|
The proxy function |
Support Proxy ARP, DNS Proxy |
|
Redundancy backup |
Support for VRRP, HSRP Hot Standby Router Protocol |
|
Characteristics of DHCP |
DHCP Server, DHCP Client and support DHCP relay |
|
Function of NAT |
Support the static or dynamic NAT address translation function |
|
Safety characteristics |
IEEE 802.1x port certification, PKI certification Hardware support for IP ACL ACL ACL, MAC, Vlan User classification management and password protection Net shield technology |
|
Quality of service |
IEEE 802.1Qau congestion mechanism |
|
Network management |
SNMP v1/v2/v3 |
|
Physical characteristics |
|
|
Appearance size |
440x230x44(mm) |
|
Power characteristic |
AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
|
Power |
80W |
|
Indicator lamp |
Power indicator, indication of system, connecting / transceiver instructions |
|
Environment humidity / temperature |
0-50 ºC operation,-40-70 ºC preservation,0-90% no condensation |
User Guide
1.Check the PoE switch
(1)Please check the enclosure,RJ45 ports,LED indicators ,sure they are ok.
(2)Connect the PoE switch with power,make sure the initialization of PoE switch is available as below:
POE indicator is off at the beginning when power connected
PWR indicator is on and keeps
Other green indicators will be on ,then off after one or two seconds
2.Connection cables:
(1) Connected the PoE switch to PD( like IP camera, wireless AP) by CAT5 or 6 cables
(2) Connected the external power adapter to PoE switch
(3) Connected the power cord to AC plug
Our Exhibition
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}