| Communication Mode: | Full-Duplex & Half-Duplex |
|---|---|
| Type: | Ethernet Switch |
| Transmission Rate: | 10/100/1000Mbps |
| Ports: | 24 |
| Product Name: | 24 Ports Gigabit Smart Poe Switch |
| Uplink Ports: | 2*10/100/1000Mbps SFP Uplink Ports |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Description
6 ports 1000M managed PoE switch with 2 gigabit combo is very suit for high definition ip camera and wireless AP(AC) application. All 16 PoE ports are compliant with ieee802.3at (PoE+) and 802.3af(PoE) ,The PoE switch is built in 360 watts industry power supply, which can continue operating for long time. It supports Web and SNMP management with function including VLAN, IGMP Snooping, Link Aggregation, QOS, Port Mirror, STP. You can build your business network quickly by using it.
24 10/100/1000Mbps rj45 + 2 gigabit SFP port with 24 poe(+)
Support Poe+, up to 30 watts per port
Advanced Poe management function
Web-based and SNMP management
Support VLAN ,IGMP Snooping, Link Aggregation, QOS, Port Mirror, STP.
Total power supply 360 watts
Auto detect powered device
|
The product model |
L3 24+4 10Gigabit Ethernet Switch |
|
Basic characteristics |
|
|
Fixed port |
24 10/100/1000Base-T Ethernet ports, 4 10G SFP+ ports |
|
Backplane bandwidth |
128Gbps |
|
Packet forwarding rate |
95.232Mpps |
|
Processor |
RISC 400MHz |
|
Flash memory capacity |
8MB |
|
The memory capacity |
128MB |
|
Address table |
16K |
|
Product characteristics |
|
|
Spanning tree |
Support STP, RSTP, MSTP |
|
VLAN |
Support port-based VLAN |
|
Flow control |
Based on a standard IEEE 802.3x flow control |
|
Broadcast control |
Restraining broadcast storm, stop sending so long as reaching a critical point |
|
multicast control |
IGMP Snooping multicast message automatic monitoring |
|
multicast routing |
IGMP v1/v2/v3, MLDv2 |
|
Port binding |
Each group of a maximum of 8, while support 128 group |
|
Port mirroring |
Support based on flow classification mirroring and port mirroring |
|
Stacked |
Stacked 16 hard, soft stacking 32 |
|
Routing management |
Static routing |
|
Strategy routing |
Support based on IP strategy routing |
|
The proxy function |
Support Proxy ARP, DNS Proxy |
|
Redundancy backup |
Support for VRRP, HSRP Hot Standby Router Protocol |
|
Characteristics of DHCP |
DHCP Server, DHCP Client and support DHCP relay |
|
Function of NAT |
Support the static or dynamic NAT address translation function |
|
Safety characteristics |
IEEE 802.1x port certification, PKI certification Hardware support for IP ACL ACL ACL, MAC, Vlan User classification management and password protection Net shield technology |
|
Quality of service |
IEEE 802.1Qau congestion mechanism |
|
Network management |
SNMP v1/v2/v3 |
|
Physical characteristics |
|
|
Appearance size |
440x230x44(mm) |
|
Power characteristic |
AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup |
|
Power |
80W |
|
Indicator lamp |
Power indicator, indication of system, connecting / transceiver instructions |
|
Environment humidity / temperature |
0-50 ºC operation,-40-70 ºC preservation,0-90% no condensation |
User Guide
1.Check the PoE switch
(1)Please check the enclosure,RJ45 ports,LED indicators ,sure they are ok.
(2)Connect the PoE switch with power,make sure the initialization of PoE switch is available as below:
POE indicator is off at the beginning when power connected
PWR indicator is on and keeps
Other green indicators will be on ,then off after one or two seconds
2.Connection cables:
(1) Connected the PoE switch to PD( like IP camera, wireless AP) by CAT5 or 6 cables
(2) Connected the external power adapter to PoE switch
(3) Connected the power cord to AC plug
Our Exhibition
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}