Communication Mode: | Full-Duplex & Half-Duplex |
---|---|
Type: | Ethernet Switch |
Transmission Rate: | 10/100/1000Mbps |
Ports: | 24 |
Product Name: | 24 Ports Gigabit Smart Poe Switch |
Uplink Ports: | 2*10/100/1000Mbps SFP Uplink Ports |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Description
L2 24+4 10Gigabit Ethernet Switch is standard third-layer non-blocking switch. Provides 24 10/100/1000Base-T Ethernet ports, 4 10G SFP+ ports. Based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time, L3 24+4 10Gigabit Ethernet Switch provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.The user can set all kinds of functions of switch through the Web, SNMP and so on. L3 24+4 10Gigabit Ethernet Switch very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.
48-Port 10/100/1000Mbps +4 Gigabit Como unmanaged PoE Switch
• 48-Port support power to PoE Powered Device
• Complies with the IEEE 802.3f/at standard
• If 8 POE port work only, then complies with IEEE 802.3at standard,25W each port
• Each Switching port support auto-negotiation 10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet) supported
• Support MAC address auto-learning and auto-aging
• Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Non blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput
• 7.2 Gbps Switching Capacity
• On/Off power switch
Model |
POE4804M |
Product |
48+4 Full Gigabit Managed PoE Switch |
Fixed Port |
48*10/100/1000Base-TX PoE 4*SFP |
PoE Port |
1-48 port supports PoE |
PoE type |
Port1~4: support IEEE802.3af/at/poe++/bt Port5~48: support IEEE802.3af/at |
Console Port |
1*console port |
Reset Key |
1 |
CPU |
MIPS-34Kc UP to 700M |
DDR |
1G DDR3 1333MHz |
Buffer |
Fully integrated 12 M packet buffer |
FLASH |
16M |
RAM |
128M |
Bandwidth |
128Gbps |
Packet Forwarding |
74.88Mpps |
MAC Address |
16K |
Network Protocol |
IEEE 802.3 IEEE 802.3u 100BASE-TX IEEE 802.3ab1000BASE-T IEEE 802.3x IEEE 802.3z 1000BASE-X IEEE 802.3af/at IEEE 802.3ad IEEE 802.3q ,IEEE 802.3q/p IEEE 802.1w,IEEE 802.1d ,IEEE 802.1S STP(Spanning Tree Protocol) RSTP/MSTP( Rapid Spanning Tree Protocol) EPPS ring network protocol EAPS ring network protocol |
Port Specification |
10/100/1000BaseT(X) Auto |
Transmission Mode |
Store and Forward(full wirespeed) |
Transmission Distance |
10BASE-T : Cat3,4,5 UTP(≤250 meter) 100BASE-TX : Cat5 or later UTP(≤100 meter) 1000BASE-TX : Cat6 or later UTP(≤1000 meter) |
Watt |
≤550W |
LED Indicator |
PWR:Power LED SYS:(System LED) 1~48:(Green LED=10/100M Link LED,Orange LED=PoE indicator) 49~52:(Link/Act LED=10/100M Link LED,1000M=Gigabit Link LED, |
Power |
Built-in power AC 100~240V 50/60HZ MAX Current 4.8A( Optional: 6.5A/9.5A/12A ) MAX Power 550W(Optional: 550W/800W/1100W) |
Operating Temperature/Humidity |
-20~+55°C;5%~90% RH Non coagulation |
Storage Temperature/Humidity |
-40~+75°C;5%~95% RH Non coagulation |
Product size/Packing size(L*W*H) |
440mm*390mm*45mm 515mm*475mm*95mm |
N.W/G.W(kg) |
4.6kg/5.4kg |
Installation |
1U, Rack type,19”(optional machine hanger spare parts) |
Lightning protection level |
3KV 8/20us; IP30 |
Certificate |
CE mark, commercial;CE/LVD EN60950; |
Warranty |
Whole device for 1 year(Accessories not included) |
User Guide
1.Check the PoE switch
(1)Please check the enclosure,RJ45 ports,LED indicators ,sure they are ok.
(2)Connect the PoE switch with power,make sure the initialization of PoE switch is available as below:
POE indicator is off at the beginning when power connected
PWR indicator is on and keeps
Other green indicators will be on ,then off after one or two seconds
2.Connection cables:
(1) Connected the PoE switch to PD( like IP camera, wireless AP) by CAT5 or 6 cables
(2) Connected the external power adapter to PoE switch
(3) Connected the power cord to AC plug
Suppliers with verified business licenses