Communication Mode: | Full-Duplex & Half-Duplex |
---|---|
Type: | Ethernet Switch |
Transmission Rate: | 10/100Mbps |
Ports: | ≦8 |
Product Name: | 8-Port 10g Switch |
Network: | Wired LAN, Poe, GSM |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
-16x10/100/1000Base-TX RJ45 ports, 2x1000Base-FX Fast SFP ports
-Support Auto-MDIX, and full/half duplex self-negotiation mode
-Provide SC/FC/ST/LC interface fiber port, support single/dual fiber transmission
-Support 16K bytes giant frame, compatible with various extension protocol
-16K MAC address table
-Support IEEE802.3az energy efficient Ethernet technology
-Support IPv6 Protocol
-Electric 4KV surge protection, easy to use in outdoor environment
-Complete status indicator, working state at a glance
-Power input polarity protection design, no worry about wrong operation
-Metal case, no fan design
-Installation method: DIN-rail /Wall mounting
Physical Port | |
Copper Ports | 16 10/100/1000Base-T RJ45 auto MDI-MDI-X |
Fiber Ports | 2 1000Base-SX/LX/BX SFP interfaces |
Parameters | |
Ethernet standards | IEEE802.3 IEEE802.3u IEEE802.3z IEEE802.3ab IEEE802.3x IEEE802.3az IEEE802.3ah IEEE802.1X IEEE802.1Q |
Bandwidth | 40.0Gbps |
Buffer Memory | 8M bits on-chip buffer memory |
Jumbo Frame | Up to10k Bytes |
MAC address table | 16K entries |
ESD Protection | 6KV |
Transmission mode | Store and Forward(full/half duplex mode) |
LED Indicator | |
Power | Connect-always |
RJ45 | Link/Act: connect-always; data exchange-blink Speed light: 100Mbps-always; 10Mbps-blink |
Fiber | Link/Act: connect-always; data exchange-blink |
Power Information | |
Power access mode | Phoenix terminal Block |
Redundant power input | 9-56VDC |
Overload protection | Yes |
Power reverse | Support |
Power consumption | Full-load<10W |
Physical Property | |
Protection grade | IP40 aluminum case |
Cooling mode | Natural cooling, no fan design |
Dimensions | 180mm x 146mm x 47mm (L x W x H) |
Installation mode | DIN-rail / wall-mountable |
Weight | 750g |
Working Environment | |
Operating Temperature | -40ºC~75ºC |
Operating Humidity | 5%~90% non-condensing |
Storage | -40ºC~85ºC |
Warranty | |
MTBF | 50,000 hours |
Defects Liability Period | 3 year warranty, lifetime technical support |
Certification Standard | |
EMI | FCC Part15 Subpart B Class A,EN 55022 Class A |
EMS | EN61000-4-2(ESD), EN61000-4-3(RS), EN61000-4-4(EFT), EN61000-4-5(Surge), EN61000-4-6(CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety grade | EN60950-1 |
User Guide
1.Check the PoE switch
(1)Please check the enclosure,RJ45 ports,LED indicators ,sure they are ok.
(2)Connect the PoE switch with power,make sure the initialization of PoE switch is available as below:
POE indicator is off at the beginning when power connected
PWR indicator is on and keeps
Other green indicators will be on ,then off after one or two seconds
2.Connection cables:
(1) Connected the PoE switch to PD( like IP camera, wireless AP) by CAT5 or 6 cables
(2) Connected the external power adapter to PoE switch
(3) Connected the power cord to AC plug
Suppliers with verified business licenses